Firmware Updater
cross icon, svg, white
You’re using a mobile device.
For proper updating, please use the updater on a desktop or laptop computer.
Before you begin
1.
In order to use this updater, you need an up-to-date version of Chrome, Opera or Brave browsers.
2
On Windows, you may have to update the driver to WinUSB.
Check this Windows documentation here
3.
Or you can download the free software, Zadig.
Followed the steps above?
Time to begin the update
start firmware update
Connect your device using
a Chrome or Opera browser
Your device has multiple DFU interfaces. Select one from the list below:

Select a firmware from the list
or choose a .bin file from your computer
No file chosen
Press program to upload the firmware
Congratulations!
You’ve successfully updated your device’s firmware — great job. Wishing you smooth jams, happy accidents, and endless inspiration ahead.
back to support page
Back
Next Step
Updater Instruction
  1. Use a supported browser
    Open this page in Google Chroome, Opera, or Brave.
    Other browsers may not support the update process correctly.
  2. Prepare your module
    Power down your modular system and remove the Meta module from your case.
    Important! Do not power the module from any source during the update.
  3. Enter firmware update mode
    Hold the BOOT button on the back of the Meta module.
    While holding it, plug a Micro USB cable into Meta's USB port.
  4. Connect to your device
    Click the connect button below to begin. Make sure your browser detects a device.
    Choose "DFU in FS Mode" (or any option starting with "DFU...") from the list that appears.
  5. Choose firmware
    Select the firmware version you want to install from the dropdown menu.
  6. Start the update
    Click program and wait for the progress bar to complete.
  7. Finish
    When the LEDs on Meta light up, the update is complete.
    You can now disconnect the USB cable and return the module to your setup.
Troubleshoot
1.
If the updater isn’t working on your Chrome or Opera browser, try clearing the cache or press Shift + Command + R for a hard refresh.
2
Make sure you connect the module to the computer using a good Micro USB data cable (and not power only!).